The Restaurant Store - Kitchen Equipment and Utensils

The Hunter 35 DSLR Holster Bag from Ruggard is slightly larger than the Hunter 25 and holds a DSLR (up to semi-pro size) with lens attached, face down, in shooting position. When you're ready to shoot, simply remove your camera, get the shot and replace your camera in the bag. The zippered top of the bag opens away from your body for fast access to your gear. This also serves as a security feature since no one but you will be able to see inside the bag.

The bag has a water-repellent exterior and smooth polyester lining that helps prevent scratches to the finish of your camera/lens combo. Inside, there are two removable touch fastened strips that can be configured to support your gear.

For storage, there is a front zippered organizer panel, mesh side pocket and two side loops that accept optional pouches. On the inside of the quick-release flap, there are two touch fastened memory card pockets. The bag is carried by its removable shoulder strap, top carry handle or belt loop that will leave you hands free. The zippers have yellow pull tabs that make the bag easy to use while you're wearing gloves.

Designed for SD devices that can capture Full HD, 3D, and 4K video, as well as raw and burst photography, the 64GB Extreme UHS-I SDXC Memory Card from SanDisk has a capacity of 64GB, is compatible with the UHS-I bus, and features a speed class rating of V30, which guarantees minimum write speeds of 30 MB/s. If your device does not support the V30 standard, this card also supports the U3 standard, which likewise guarantees minimum write speeds of 30 MB/s. Read speeds are supported up to 150 MB/s and write speeds max out at 60 MB/s. A built-in write-protect switch helps to safeguard against the accidental erasure of card data.

While this card has been designed for cameras that are UHS-I / V30 / U3 compatible, it may be used in devices that do not support UHS-I / V30 / U3. However, bear in mind that this card will then default to your device's speed class and bus rating, such as UHS-I and U1, which supports minimum write speeds of 10 MB/s, or Class 10, which also supports minimum write speeds of 10 MB/s.

Keep your optical surfaces clean with the Sensei Optics Care and Cleaning Kit. This kit contains a pack of lens tissues, a lens cleaning pen, a bulb air blower, a paint brush, a lipstick brush, lens cleaning fluid, and a see-through mesh travel case to put everything in. This kit can be used to clean a variety of different optics and glass. You can use the air bulb blower and any of the three supplied brushes to initially remove dust from the surface. Sensei recommends applying a small amount of the alcohol- and ammonia-free cleaning fluid directly to the lens tissue. Then, gently rub in small circular motions to remove stubborn smudges or fingerprints from the glass. For those more stubborn blemishes or smudges, the lens pen is very effective.